Vacuum/Ashing Muffle Chamber

UP-6202B Vacuum Low Pressure Test Chamber5

UP-6202B Vacuum Low Pressure Test Chamber5(图1)


Product Description:

High altitude low pressure simulation test chamber is in a short period of time to achive low-pressure sample storage state,can automatically control the test cycle,the entire process to monitor the pressure change in the box to achieve automatic termination of the test.

Product Parameter: 

Model No 

UHV-150

UHV-225

UHV-408

UHV-800

UHV-1000

Working   room(L)

150

225

408

800

1000

Inner   chamber size(mm)W*H*D

500*600*500

500*750*600

600*850*800

1000*1000*800

1000*1000*1000

Exterior chamber   size(mm)W*H*D

1000*1600*1400

1000*1750*1500

1100*1850*1700

1500*2000*1700

1850*1600*2250

Packaging   volume(CBM)

3

3.5

4.5

5.5

6

G.W.(KGs)

320

350

400

600

700

Performance

Temperature   range

-160,-150,-120,-100,-80,-70,-60,-40,-20,0~+150,200,

250,300,400,500

Testing   temperature range

-160,-150,-120,-100,-80,-70,-60,-40,-20,0~+150,200,

250,300,400,500

Humidity   range

20%RH ~98%RH(10%RH ~98%RH   or 5%RH ~98%RH)

Temp.fluctuation

±0.5(Room pressure)

Temp.accuracy

±2.0(Room pressure)

Heating   up time

≤60min(+20~+150,RP,No-Load)

Cooling   down time

≤45min(RP)

≤60min(RP)

≤90min(RP)

Pressure   range

Atmospheric pressure~-98KPa,~133KPa,~0KPa

Pressure   control tolerance

±0.1kPa(≤2kPa),±5%(2kPa~40kPa),±2kPa(≥40kPa)

Depressurization   time

≤20min

≤25min

≤30min

≤45min

≤50min

Working   environment

Temp:+5~+35;Humidity:≤90%RH;Air   pressure:86-106kPa

Material

Exterior   chamber materia

Stainless   steel plate+ powder coated

Inner   chamber materia

SUS#304   stainless steel plate

Insulation   Material

PU   Fiberglass wool

System

Air   circulation system

Cooling   fan

Heating   System

SUS#304   stainless steel high-speed heater

Humidification   system

Imported   compressor,Tecumseh compressor(or Bizer Compressor),finned type   evaporator,air(Water)-cooling condenser

Dehumidification   system

ADP   critical dew point cooling/dehumidifying method

Vaccuum system

Equipped with vacuum pump

Controlling   system

TEMI880,990

Power kw

8

10

12

15

20

Water   supply

Water   temperature:≤30;water pressure:0.2~0.4MPa;flow   rate:≥10T/h

Other   components

Specimen   holders 2pcs,electrical wire 1pc(3M),pressure testing port.

Safety   protection device

Over-heat   protection circuit breaker,Compressor overload protection,Control system   overload protection,Humidifying system overload protection,Overload indicator   lamp.

Power   supply

AC   3Ψ380V 60/50Hz













Feature:

1.Temperature range from -70 to 200°C

2.Altitude range from ground to 100,000 feet

3.Optional humidity control when altitude system is off

4.Chamber interior size specified by customer

5.Automatic altitude control, integrated with temperature controller
      —No manual setting of altitude level!

6.Vacuum pump sized for climb/dive rate required by application

7.Viewing window and cable ports available

 Standard:   

1.GB10590-89  Low-temperature and low atmospheric pressure testing condition

2.GB10591-89 High-temperature and low atmospheric pressure testing condition

3. GB11159-89 low atmospheric pressure technical condition

4. GB/T2423.25-1992 Low-temperature and low atmospheric pressure test chamber

5. GB/T2423.26-1992 High-temperature and low atmospheric pressure test chamber

6.GJB150.2-86 High-temperature and low atmospheric pressure(Altitude) test

7,IEC60068-2-1.1990 Testing methods of Low-temperature test chambers

8,IEC60068-2-2.1974 Testing methods of High-temperature test chambers

9,IEC-540

10,ASTM D2436

11,JIS K7212

12,DIN 50011

13,BS2648

14,Mil-Std 202G (conditions 105C, A/B/C/F)

15,Mil-Std 810G (condition 500.5)

16,IEC 60068-2-39

17,IEC 60068-2-40

18,RTCA/DO-160F

19,JIS W 0812