Shoes/Leather Test Machines

UP-4028 Shoe Lace and Shoe Eyelets Abrasion Test Machine

UP-4028 Shoe Lace and Shoe Eyelets Abrasion Test Machine(图1)

Product introduction: 

Shoe Lace and Shoe Eyelets Abrasion Test Machine is used to test the abrasion resistance for shoelace of cotton, hemp, chemical fiber or other materials.

0

Principle :

Shoe Lace and Shoe Eyelets Abrasion Test Machine:Take two shoelace, mutually hook in the middle. Clamp the both ends of the shoelace at the movable fixture of shoelace rubbing tester, which can make reciprocating linear motion; clamp one end of the other shoelace on the corresponding fied fixture and another end of the shoelace round by a fixed pulley and hanging the a weight. Make the two shoelace abrasion each other by reciprocating linear motion. Then check the wear resistance, when the machine run up to pre-set times, the machine stop.

 

Specifications :

Test   position

6 groups

Control

Touch-screen control, 0~999,999

Min. Separation between movable and fixed   fixtures

280 ±50 mm

Movable fixture stroke

35± 2 mm

Test speed

60 ± 6 cyles/min

Profile board

Angle 52.5degree; Length120 mm

Stainless metal strip

W: 25mm, L: 250mm

Weight

250 ± 3g

Power supply

220V 50/60HZ

Dimensions ( L x W x H )

66 x 58 x 42cm

Weight

50 kg

Standards

DIN 4843  

SATRA TM 154  

ISO 22774   

QB/T 2226   

GB/T 3903.36