Painting Coating Packaging Test Machine

UP-6024 Automatic drawing ring method adhesion tester

UP-6024 Automatic drawing ring method adhesion tester(图1)

Automatic drawing ring method adhesion tester

Note: Using the ring method to evaluate the adhesion of the film and the substrate is one of the most traditional methods in China.This method uses a specially designed instrument to continuously draw many circles of the same diameter on the coating to be tested, these circles overlap each other at a certain distance, and then divide them into seven parts according to the area size of the intersecting part of the circle.When assessing, check the integrity of each part of the film, to a part of the area of more than 70% of the film intact to assess the corresponding grade

It is the latest domestic automatic ring method adhesion tester, it meets the GB/T 1720 standard requirements, compared with the traditional domestic other machines, has the following characteristics:

All aluminum oxide body, high-grade, beautiful, light

1. The special indicator light can automatically judge whether the needle has cut the coating to the substrate, with the characteristics of accurate operation, convenient and so on

Special precision machining needle, to ensure that different needle with good consistency

Electric complete circle, uniform speed, constant strength, test results with high reproducibility and comparability

2. Sliding platform is convenient for multiple tests at different positions on the same test board

Rotary arm design, very convenient to change the needle and test plate

3. Double nuts are used to adjust the clearance of the screw, which makes the platform run more smoothly, reduce the error caused by the clearance of threads and make the data more accurate

The working platform adopts double guide limit, which is more stable than single guide.

You can return to the starting point with one key after completing the single test

4. Special tool for drawing needle is more convenient and quick to assemble and disassemble

Precision machining thread control ring diameter, test results more accurate

5. Precise positioning of the starting point and end point of the working platform, strictly ensure that each test can meet the standard travel

6. Multistage weight combination to get the most suitable weight load.

7. The weight plate is independently rotating design, which reduces the influence of its inertia on the test load when running.

Main technical parameters

Turning radius 

R=5.25mm

Guoquan   length

80mm

No-load pressure

200g

Farmar   weight

100g,200g,500g

Scriber

The   hardness of HRC 45 ~ 50 alloy,

Tip   radius (0.05±0.01) mm

Scriber   speed

About 90   RPM

Substrate   requirement

120 x 50   x 0.2 0.3 mm tinplate