Abrasion Test Machines

UP-1006 Martindale Abrasion Testing Machine

UP-1006 Martindale Abrasion Testing Machine(图1)UP-1006 Martindale Abrasion Testing Machine(图2)

Martindale Abrasion Testing Machine

 

Product introduction

Martindale Abrasion Testing Machine is used to determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abrasion at low pressures and in continuously changing directions and the amount of abrasion. The unique design allows removal of individual sample holders for examination without lifting the top motion plate.

Standards 

ISO 20344 section 6.12, ISO 5470-2, AS/NZS 2210.2 section 6.12, GB/T 20991 section 6.12

EN 344-1 section 5.14, BS3424.24, ASTMD4966, SATRA TM31

Specifications 

Control mode

LCD Counter display

Abradant table

≥ 125mm

Lissajous figure

60±1 mm x 60±1 mm

Test Pressure

 

A) Specimen holder: (198 ±2)g

B) Larger loading piece: (597±5)g

C) The sum mass: (795±7)g, for workwear,   upholstery, bed linen and fabrics for technical use ( nominal pressure of   12kpa)

A) Specimen holder: (198 ±2)g

B) Smaller loading piece: (397±5)g

C) The sum mass: (595±7)g, for apparel and   household textiles, excluding upholstery and bed linen (nominal pressure of   9kpa)

Exposed area of specimen holder

645 ± 5 mm2

Rotational Speed

47.5 ± 2.5 r/min

Pressing Weight

 

Mass : (2.5 ± 0.5) kg

Diameter: (120 ± 10) mm

0