Temp Humi/Climate Test Chamber

UP-6112 LED photoelectric constant temperature and humidity test box

UP-6112 LED photoelectric constant temperature and humidity test box(图1)UP-6112 LED photoelectric constant temperature and humidity test box(图2)

LED photoelectric constant temperature and humidity test box for different types of LED products (LED chips, LED parts, LED bulbs, LED tubes, LED modules), carry out relevant environmental reliability tests, estimate LED service life and evaluate product characteristics; test high temperature High humidity, high and low-temperature operation test, temperature cycle... etc.

 LED photoelectric constant temperature and humidity test box Features:

Equipped with test racks for semi-finished LED products;

The large window can achieve the purpose of online test and observation more effectively;

Meet the power-on and bias test in the LED test process, equipped with integration capabilities and communication commands (Labview, VB, VC, C++), equipped with 4. standby power supply load on-off control system;

It is very reliable to control the stability of the product's super-large load heat in the high temperature and high humidity, low-temperature storage, and environmental cycle control of Seth;

Effectively solve the problem of preventing condensation and water dew;

Equipped with RS232 data connection port, USB data storage, and download function;

Effectively achieve low humidity 60°C (40°C)/20%RH efficiency;

Effectively solve the problem of preventing condensation and water dew;

 

LED photoelectric constant temperature and humidity test box meets the standard

1. GB/T10589-1989 low-temperature test chamber technical conditions; 2. GB/T10586-1989 damp heat test chamber technical conditions;

3. GB/T10592-1989 high and low-temperature test chamber technical conditions; 4. GB2423.1-89 low-temperature test Aa, Ab;

5. GB2423.3-93 (IEC68-2-3) constant damp heat test Ca; 6. MIL-STD810D method 502.2;

7. GB/T2423.4-93 (MIL-STD810) method 507.2 procedure 3; 8. GJB150.9-8 damp heat test;

9.GB2423.34-86, MIL-STD883C method 1004.2 temperature and humidity combined cycle test;

10.IEC68-2-1 test A; 11.IEC68-2-2 test B high and low temperature alternating; 12.IEC68-2-14 test N;

IEC 61215 Solar Module Reliability Test

IEEE 1513 temperature cycle test & damp freezing test & damp heat test

UL1703 Flat Panel Solar Module Safety Certification Standard

IEC 61646 Thin Film Solar Photovoltaic Module Test Standard

IEC61730 Solar cell system safety-structure and test requirements

IEC62108 Concentrating Solar Receiver and Parts Evaluation Standard

  

Model

UP-LED500

UP-LED800

UP-LED1000

UP-1500

Inner size(mm)

500x500x600

1000x800x1000

1000x1000x1000

1000x1000x1500

Outermm

1450X1400X2100

1550X1600X2250

1550X1600X2250

1950X1750X2850

Performance

Temp Range

0/-20/-40/-70℃~+100/+150/+180

Temp uniformity

≤2

Temp deviation

±2

Tempfluctuation

≤1℃(≤±0.5, refer to GB/T5170-1996

Heating time

+20℃~+100about30m/+20℃~+150about45minites

Cooling time

+20℃~-20about 40m / +20℃~-40about 60m/ +20℃~-70about 70m

Humidity range

2098%RH

Humidity deviation

±3%(75%RH   below), ±5%(75%RH above)

Temp Controller

Chinese and English color touch screen + PLC controller

Low temp system adaptability

Meet the compressor automatic operation in the full   temperature range

Equipment operation mode

Fixed value operation, program operation

Cooling System

Imported fully enclosed compressor

Imported fully enclosed compressor

Air-cooled

Air-cooled

Humidification water

Distilled or deionized water

Safety protection measures

Leakage, short   circuit, over temperature, water shortage, motor overheating, compressor over   pressure, overload, over current

Power -40°C (KW)

9.5KW

11.5KW

12.5KW

16KW

Standard device

Sample shelf (two sets), observation window,   lighting lamp, cable hole (Ø50 one), with casters

power supply

AC380V 50Hz three-phase four-wire + ground wire

Material

Shell material

Electrostatic spraying of cold-rolled steel plate   (SETH standard color)

Inner wall material

SUS304 stainless steel plate

Insulation Materials

Rigid polyurethane foam