Temp Humi/Climate Test Chamber

UP-6195T Two Zones Design Temperature Humidity Test Chamber

UP-6195T Two Zones Design Temperature Humidity Test Chamber(图1)

Design Standard:

GB2423/T5170/10586/10592, IEC68,GJB150,JIS C60068, ASTM D4714, CNS3625/12565/12566

 

Uses:

This equipment can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.

 

Specification

Model

UP-6195

Inner size W×H×Dmm

500*400*400  500*600*500  600*850*800    100*100*80 100*100*100

Outside size W×H×Dmm

92*138*108 102*146*116 102*162*126 113*172*148 158*195*148   158*193*168

Inner chamber   volumeV

80L  150L 225L  408L    800L  1000L

Temperature   and humidity Controll range

-20150   -40150  -70150   RH20%-98%

Function

Temperature   and humidty fluctuation

±0.5±2.5%RH

Temperature   and humidity deviation

±0.5-±2±3%RH>75%RH;   ±5%RH(≤75%RH)

Controller   resolution

±0.3±2.5%RH

Controller   brand

Korea TEMI880

Heating Time

RT-HT/min

100

150

40

50

Cooling Time

RT-LT/min

-20

-40

-60

-70

40

50

55

80

Power supply KW

4.0

6.0

6.0

6.0

Material

Inner material

SUS 304#  steel plate

Outside   material

SUS 304#  steel plate(surface   disposing)

Thermal insulation material

Thermostability high density chlorine formic acid   foam insulator material

System wind   pathround-robin mode

centrifugal fan-broadband enforce circulation

Refrigeration way

Single stage compression   refrigeration

Refrigerator

whole sealing piston France Taikang brand Compressor

Freezing fluid

R4O4A or USA Dupont environmental protection   refrigerantR23+R404

Condensation way

forced air cooling or water-cooling

Heater

Nichrome heating wire heating

Humidifier

Semi-enclosed   steam humidification

Water-provide   way

full-automatic  periodical feeding

Standard   configuration

1 Observe   windowdouble-deck   cavity toughened glass,1  50mm   test hole in the left,1  PL inner chamber lamp2clapboards, 1 bag of wet and dry bulb,3 fuses, 1 power line.

Safety device

Non-   fuse-switchcompressor   overload, refrigerant high low voltage,over-humidity and temperature protection,Protection switch,fuse stoppage   warning system

Power

1φ 220V AC±10% 50/60Hz    3φ   380V AC±10% 50/60Hz