Temp Humi/Climate Test Chamber

UP-6195C Temperature Humidity Vibration Test Chamber

UP-6195C Temperature Humidity Vibration Test Chamber(图1)

Temperature.humidity and vibration test chamber/Temp.humidity and vibration compatible Chambers

For years Temp.humidity and vibration compatible Chambers have been the workhorses of the environmental test chamber industry. Originally created to meet military test standards, their flexible design has made them suitable for a wide variety of applications. Fast temperature changes of 5 to 25°C/m. are possible, even with significant loads. The chambers have a removable floor, allowing integration with vibration test systems. Custom designs are common, allowing configuration to meet your exact requirements.

    Special model can interface with both vertical and horizontal vibration systems

Feature

1,Capacity: 63 L to 6000L

2,TemperatureRange:-160,-140,-120,-100-80,-70,-60,-40,-20,0~+150,200,250,300,400,500

3,Humidity Range: 10-99%RH

4,Cooling rate: 2-3/min (standard), 5/min, 10/min , 20/min as option 

5,Vibration: maximum up to 5000kgf , 100g

Refrigeration and Plenum

1,Rear-mounted plenum with cooling coil and nichrome wire heaters

2,Two ¾ h0p blower motors with one-piece stainless steel shafts

    3,Non-CFC cascade refrigeration system using semi-hermetic Copeland Discus compressors

    4,Hinged service access doors with lockable snap-action latches

   Technical parameters:

Inner chamber   size(mm)W*H*D

850*600*600

850*600*800

1000*1000*800

1000*1000*1000

Exterior chamber   size(mm)W*H*D

1750*800*1020

1750*800*1320

1900*1200*1320

1900*1200*1520

Max table-board size of   Vibrostand(mm)

Horizontal:400*400

Vertical:400*400

Performance

Temperature range

-160,-140,-120,-100,-80,-70,-60,-40,-20,0~+150,200,250,300,400,500

Humidity range

20%~98%R.H (10%~98%R.H;5%~98%R.H Optional).

Temp.&Humi   fluctuation

±0.5, ±2%.

Temp.Humi.Uniformity

±1, ±2%.

Temp.humi Deviation

≤±2/ ±3%RH.

Heating up time

About 3~4/min.(Customized   requirements:Fast temperature change rate:5~25/min,linear average or nonlinear average).

Cooling down time

About 0.7~1/min (Customized   requirements:Fast temperature change rate:5~25/min,linear average or nonlinear average).

Material

Inner chamber material

SUS#304 stainless steel   plate

Exterior chamber   material

Stainless steel plate+   powder coated

Insulation Material

PU & Fiberglass   wool

System

Air circulation system

Cooling fan

Fan

Sirocco fan

Heating System

SUS#304 stainless steel   high-speed heater

Air flow

Forced Air   Circulation(It enters at bottom and leaves at top)

Humidification system

Surface evaporation   system

Refrigeration system

Imported   compressor,Tecumseh compressor(or Bizer Compressor),finned type   evaporator,air(Water)-cooling condenser

Refrigerating fluid

R23/ R404A USA   Honeywell.

Condensation

Air(Water)-cooling   condenser

Dehumidifying system

ADP critical dew point cooling/dehumidifying method

Controlling system

Digital electronic indicators+S.S.R.With PID automatic   calculation capability

Operation interface

Grande Expertise in Temperature & Humidity   Controller,Chinese-English Shift.

Controller

Programmable capability

Save   120 profiles with up to 1200 steps each

Setting range

Temperature:-100+300

Reading accuracy

Temperature:0.01

Input

PT100 or T Sensor

Control

PID control

Communication interface

Equipped with standard   communication interface devices USB,RS-232 and   RS-485,enable the test chamber to be connected with personal computer(PC),to   achieve multi-machine control and management at the same time.Standard: USB   external memory port.Optional: RS-232, RS-485, GP-IB, Ethernet

Print function

Japan Yokogawa   Temperature Recorder(Optional accessories)

Auxiliary

Limit Alarm,Self Diagnosis,Alarm   Display(Failure Cause),Timing device(Automatic Switch)

Accessories

Multi-layer vacuum   glass observation window,Cable port(50mm),Controlling status indicator   lamp,Chamber light,Specimen loading shelf(2pcs,position adjustable),Guaze   5pcs,Operation manual 1 set.

Safety protection   device

Over-heat protection   circuit breaker,Compressor overload protection,Control system overload   protection,Humidifying system overload protection,Overload indicator lamp.

Power supply

AC 1Ψ 110V;AC 1Ψ   220V;3Ψ380V 60/50Hz

Customized service

Welcome to   Non-standard,Specail requirements,OEM/ODM orders.